beautypg.com

Set manual alert properties, Arm event early properties – WiLife V2.1 User Manual

Page 96

background image

User Guide

83

5)

Specify the camera(s) you want involved with this event and set camera alert properties for each

participating camera by double-clicking on the camera line or clicking the Edit button. (The Camera

Alert Properties screen allows you to specify the type of message you want to receive, the length of

time between motion alerts, and the number of alerts.)

6)

Click OK to save your new "No Motion" alert event. The Recording and Alerts Schedule Screen will

display the new event. Its color is gray.

Set Manual Alert Properties

Setup > Alerts > Set Manual Alert Properties

The Manual Alert Properties screen allows you to view, set and edit alert properties for each camera on the

network message type, length of motion filter, and frequency of alert notifications. These properties tell

Command Center how to send alert notifications when you manually activate them in the Alerts Scheduler

Front Control Panel. You can also edit camera properties by clicking on the Edit button.
Use the illustration below as a guideline for completing the screen:

Arm Event Early Properties

The "arming an event early" feature is accessible from the Live and

Playback screens via the Alerts Scheduler Front Control Panel.
Using the Alerts Scheduler Front Control Panel, you can also

immediately arm manual alerts, disable an active alert, or access the

Recording and Alerts Schedule.
If an alert has not been armed, the Front Control Panel will display

"Alerts Not Armed," as shown in the graphic on this page.
Simply select the option "Arm Manual Alerts Now" (which activates

alerts until you manually turn them off) or "Arm Early." Alerts are now armed.
The functions you can expect from the Alerts Scheduler Front Control Panel are described below:

A

LERTS

N

OT

A

RMED

When you first install WiLife Command Center, the Front Control Panel will display "Alerts Not Armed" until 1)

you have set up your email server; 2) you have scheduled an alert event in Scheduler; and 3) you select "Arm

Manual Alerts Now" or "Arm Early."