WiLife V2.1 - Manual (Page 103)

User Guide
90
If you would like to use Direct Mode and not be restricted to a time limit, you can enable UPnP on your router.
If you cannot enable UPnP, you can manually set ports in the router for Command Center to use. The port
addresses Command Center uses are 20570 to 20575. (Contact the manufacturer of the router or see your
firewall or router documentation for complete instructions about manually configuring ports.)
If you are using Relayed Mode, you do not have the option to switch to Direct Mode.
Mobile devices will always use Relayed mode.
Online Viewing From a PC
Note: This process assumes that you have completed the setup steps for Online Viewing.
Online Viewing is a process that consists primarily of two easy steps – logging into your WiLife Online Account
and selecting which camera or cameras you want to view. This section shows you how to accomplish those
tasks.
Our Online Viewing feature, however, offers more options that help enhance your experience. We will discuss
those in the following section as well. The layout of the section’s topics are as follows:
Log in to your WiLife Online Account
Use the My Cameras Page
View the video feed for one camera
View the video feed for all cameras
View the video feed for your cameras using the cycle feature
Using the Video Viewing Window
Viewing video in Direct or Relayed Mode
Logging into Your WiLife Online Account
online.wilife.com > My Cameras
1) Go to online.wilife.com. If you have not previously logged
in, the Please Log In page displays. These instructions
explain how to log in from this page:
2) Enter your e-mail and password. Then click Log In. You
will then be redirected to your WiLife Online page.
Hint: If you mark the “Remember me next time” check box, the
system will automatically open your WiLife Online page.
If you ever forget your password, you can come to the Log In
page and click on the link “Have you forgotten your password?”
Instructions regarding this task are found later in this chapter.