WiLife V2.1 User Manual
Page 127
Configuring Your Firewall
User Guide
114
If you do NOT find Command Center in the Program list (rare), you will need to click the Add button. On
the program dialog, enter the file name “c:\Program Files\WiLife\Command Center.exe” and click
Open. Now repeat the previous step.
Finally, click on the Advanced tab and then the GENERAL button. On the General Rules Screen, scroll
down to the rule “UPNP Port 1900 Block Rule.”
Click on the Modify button and change the rule from
Block
to
Permit
. Leave the rule checked and then
click OK to accept the change.
You have now successfully configured Norton Firewall, but remember that you may have more than
one firewall application running on your PC. You need to disable or configure each one.
Finally, you may need to exit Command Center (from the task icon) and restart for the changes to take
effect.