VIEWSONIC PJ1165 - Manual (Page 35)

ViewSonic PJ1165 34
OPTION Menu (continued)
Item Description
SERVICE Pres sing the X (or the ENTER) button calls the
SERVICE menu.
SERVICE Menu
Select an item using the S/T buttons, and press the
X (or the ENTER) button to perform each function.:
FANSPEED AUTO ADJUST LENS TYPE LENS LOCK
FANSPEED Select the fan speed level using the S/T buttons.:
HIGH NORMAL
The HIGH ups rotation speeds of fans, though. Please
use this function in using a projector at highlands etc.
memo
Note that the projector is noisier when the HIGH is
selected.
AUTO
ADJUST Select the ENABLE or the DISABLE using the S/T
buttons.:
ENABLE DISABLE
When you want to keep the current adjustment state,
select signal change to a RGB signal performs the
automatic adjustment of the vertical position (V
POSITION), the horizontal position (H POSITION), the
clock phase (H PHASE) and the horizontal size (H SIZE).
LENS TYPE Select the lens type currently used using the S/T
buttons.:
AUTO 1 2 3 4 5
Please select depending on the following.
AUTO: automatically selects optimum mode.
1: for a standard lens (Type NL-500 etc.)
2: for a fixed short throw lens (Type FL-501 etc.)
3: for a short throw lens (Type SL-502 etc.)
4: for a long throw lens (Type LL-503 etc.)
5: for a super long throw lens (Type LL-504 etc.)
memo
This setting has an influence on the keystone
distortion etc.
memo
About the optional lens ask your dealer.
LENS
LOCK Select the ENABLE or the DISABLE using the S/T
buttons.:
ENABLE DISABLE
Selecting the ENABLE locks the adjustment of the lens
shift, the zoom and the focus.
RESET Select the EXECUTE using the S button to reset the OPTION menu
items.:
EXECUTE CANCEL
The items of the OPTION menu are collectively returned to the initial
setting. Note that the items “VOLUME”, “LAMP TIME” and “FILTER TI
ME” are not reset.