VIEWSONIC PJ1165 - Manual (Page 32)

ViewSonic PJ1165 31
SCREEN Menu
With the SCREEN menu, the items shown in the table below can
be performed. Perform each operation in accordance with the
instructions in the table below.
(This table is continued to the following page.)
Item Description
BLANK Select a type of the BLANK screen using the S/T buttons.:
MyScreen ORIGINAL BLUE WHITE BLACK
The BLANK screen is the screen, which is displayed by pressing a
button.
The MyScreen is the screen you can register a desired screen, and
the ORIGINAL is the existing standard screen. The BLUE, the WHITE
and the BLACK are the non-pattered (plain) screens in each color.
memo
To avoid remaining as an afterimage, the MyScreen and the
ORIGINAL screens will change to the BLACK screen after several
minutes.
memo
For the MyScreen, please refer to the item “MyScreen” in this
table.
START UP Select a type of the START UP screen using the S/T buttons.:
MyScreen ORIGINAL TURN OFF
The START UP screen is the screen, which is displayed by detecting
no signal or an unsuitable signal.
The MyScreen is the screen you can register a desired screen, and
the ORIGINAL is the existing standard screen. When the TURN OFF
is selected, the BLUE is used.
memo
To avoid remaining as an afterimage, the MyScreen and the
ORIGINAL screens will change to the BLANK after several minutes. If
also the BLANK screen is the MyScreen or the ORIGINAL, it will
change to the BLACK screen.
memo
About the MyScreen, please refer to the item “MyScreen” in this
table. About the BLUE, BLACK and BLANK screens, please refer to
the item “BLANK” in this table.
MyScreen Pressing the X (or the ENTER) button starts the MyScreen
registration. Please see the flow chart on the following page.
MyScreen SIZE Select the size of the MyScreen using the S/T buttons.:
x1 FULL
MyScreen LOCK Select the TURN ON or the TURN OFF using the S/T buttons.:
TURN ON TURN OFF
The TURN ON disables the operation of the item “MyScreen” of this
SCREEN menu.
MENU POSITION Adjust the menu position using the S/T/W/X buttons.:
Up
Left + Right
Down
memo
To finish this operation, press the ESC button but not the W
button.