VIEWSONIC PJ1165 - Manual (Page 29)

ViewSonic PJ1165 28
INPUT Menu(Continued)
Item Description
P.IN P. INPUT Select a signal input port for the child window using the S/T buttons.:
VIDEO S-VIDEO
memo
About the child window, please refer to the section “Displaying the
Child Window”.
P.IN P. POSIT. Select the display position of the child window using the S/T
buttons.:
memo
About the child window, please refer to the section “Displaying the
Child Window”.
POWERUP
INPUT
Select a signal input port to display just when the projector is turned
on, using the S/T buttons.:
LAST INPUT M1-D RGB BNC COMPONENT S-
VIDEO VIDEO
Selecting the LAST INPUT selects the port that was used at the last
time.
INFORMATION Pressing the X (or the ENTER) button displays the INPUT
INFORMATION menu.
The INPUT INFORMATION menu shows the information about the
current signal input as illustrated below.
memo
The “FRAME LOCK” message means the frame lock function is
working. This function automatically works when a RGB signal with
vertical frequency of 50 to 60 is input, and it displays a moving picture
more smoothly.
memo
The “SACRT RGB” message means the COMPONENT port is
working as a SCART RGB port. Please refer to the item
“COMPONENT” in this table.
S2-ASPECT Select the TURN ON or the TURN OFF using the S/T buttons.:
TURN ON TURN OFF
When the TURN ON is selected, an S2-video signal can be identified
and the optimum aspect ratio is automatically selected.
memo
This item is performs only at a S-VIDEO signal.
memo
When the ASPECT button is used or the item “ASPECT” of the
MAIN menu is operated, the TURN OFF will be automatically selected
to this item.
RESET Select the EXECUTE using the S button to reset the INPUT menu
items.:
EXECUTE CANCEL
The items of the INPUT menu are collectively returned to the initial
setting. Note that the item “INFORMATION” is not reset.