VIEWSONIC PJ1165 - Manual (Page 33)

ViewSonic PJ1165 32
AUTO Menu (continued)
How to register your picture as the MyScreen
Item Description
MESSAGE Select the TURN ON or the TURN OFF using the S/T buttons.:
TURN ON TURN OFF
When the TURN ON is selected, the following message function
works.
The message of the “AUTO IN PROGRESS” for the auto
adjustment.
The message of the “NO INPUT IS DETECTED”
The message of the “SYNC IS OUT OF RANGE”
The message of the “Searching…”
The message of the “Detecting…”
The indication of the input signal by input change.
The indication of the aspect ratio by changing the aspect ratio.
The indication of “FOCUS” by adjusting the focus.
RESET Select the EXECUTE using the S button to reset the SCREEN menu
items.:
EXECUTE CANCEL
The items of the SCREEN menu are collectively returned to the initial
setting.
MyScreen is pointed on the SCREEN menu.
The MyScreen appears.
Do you capture the picture from
the current screen? NO: Press the ESC/RESET button
If the ESC/RESET
button YES: Press the ENTER button
The picture freeze and the frame for capturing appears.
Move the frame to the position of the picture which you want
to use, using S/T/W/X buttons, and press the ENTER
button to register.
Registering.
It takes about 1 minute to register.
Just when the picture registration is completed the registered
screen and the message of the right is displayed for a few
seconds.
If the picture registration failed, the message of the right is dis-
played for a few seconds.
Press the X button