VIEWSONIC PJ1165 - Manual (Page 12)

ViewSonic PJ1165 11
Connecting to a monitor
Connecting to a speaker (with amplifier)
Connecting The Power Supply
1 Connect the connector of the power cord
to the AC inlet of the projector.
2 Firmly plug the power cord’s plug into the
outlet.
WARNING
• Use extra caution when connecting the power cord as incorrect or faulty connections
may result in fire and/or electrical shock. Please adhere to the “Quick Start Guide” and
the following.
• Only plug the power cord into outlets rated for use with the power cord’s specified
voltage range.
• Only use the power cord that came with the projector. If it is damaged, contact your
dealer to newly get correct one.
• Never modify the power cord. Never attempt to defeat the ground connection of the
three-pronged plug.
• Make sure that you firmly connect the power cord to the projector and wall outlet.
Monitor
Projector
RGB in RGB cable RGB OUT
Projector
Speaker
Audio in Stereo Mini cable AUDIO OUT
AC Inlet
Connector Plug
Outlet