VIEWSONIC PJ1165 - Manual (Page 25)

ViewSonic PJ1165 24
PICTURE-1 Menu
With the PICTURE-1 menu, the items shown in the table below
can be performed. Perform each operation in accordance with the
instruct ions in the table below.
(This table is continued to the following page.)
Item Description
GAMMA Select a gamma mode using the S/T buttons.:
NORMAL CINEMA DYNAMIC CUSTOM
Selecting the CUSTOM and then pressing the X (or the ENTER) but-
ton calls the CUSTOM menu.
CUSTOM Menu
Select an item using the S/T buttons, and
press the X (or the ENTER) button to perform
each function.
GAMMA COLOR TEMP R G B
memo
The R, G and B can be selected only when the USER is selected
under the COLOR TEMP.
GAMMA Adjust the gamma data using the S/T buttons.: Up
Down
COLOR
TEMP Select a color temperature using the S/T buttons.:
HIGH MIDDLE LOW USER
R Adjust the red color level for the USER mode of the COLOR
TEMP using the S/T buttons.: Strong Weak
G Adjust the green color level for the USER mode of the
COLOR TEMP using the S/T buttons.: Strong Weak
B Adjust the blue color level for the USER mode of the
COLOR TEMP using the S/T buttons.: Strong Weak
COLOR BAL R Adjust the red color balance using the S/T buttons.:
Strong Weak
COLOR BAL G Adjust the green color balance using the S/T buttons.:
Strong Weak
COLOR BAL B Adjust the blue color balance using the S/T buttons.:
Strong Weak
SHARPNESS Adjust the sharpness using the S/T buttons.:
Clear Soft
memo
This item can be selected only at a video signal.
COLOR Adjust the whole color using the S/T buttons.:
Strong Weak
memo
This item can be selected only at a video signal.
TINT Adjust the tint using the S/T buttons.:
Green Red
memo
This item can be selected only at a video signal.