Appendix, Status read command – VIEWSONIC PJL6233 User Manual

Page 82

Appendix

Status Read Command

Format

The command is sent from PC to the projector with
the format below;
‘CR’ [Command] ‘CR’
Command: one character (refer to the command
table below.
The projector decodes the command and returns the
‘Character string’ with the format below;

7KHWDEOHVRQSDJHVDQGVKRZWKHW\SLFDOFRPPDQGOLVWVIRUFRQWUROOLQJWKHSURMHFWRU3OHDVHFRQVXOW\RXU
local dealer for further information of other commands.

Command

Function

Projector Return

Projector status

Status Read

Power On

6WDQGE\PRGH

Countdown

Cooling down

Power Malfunction

Cooling down at the temperature anomaly

6WDQGE\PRGHDIWHU&RROLQJGRZQDWWKHWHPSHUDWXUH
anomaly.

Cooling down at Power Management mode

Power Management mode after Cooling down

Cooling down after the projector is turned off when
the lamps are out.

6WDQGE\PRGHDIWHU&RROLQJGRZQZKHQWKHODPSV
are out.

Temperature

Read

7HPSHUDWXUHDW6HQVRUÛ&
7HPSHUDWXUHDW6HQVRUÛ&
7HPSHUDWXUHDW6HQVRUÛ&
H[ Û& Û& Û&
!7KHSURMHFWRUGLVSOD\V³´
( For each sensor, two digit and the tenth place
numbers are displayed with a space between each
temperature.)

Communication failure

This manual is related to the following products:

PJL6223