VIEWSONIC PJL6233 - Manual (Page 50)

Setting
3Note:
‡Auto Keystone corrects vertical distortion only,
QRWFRUUHFWKRUL]RQWDOGLVWRUWLRQ
‡7KH$XWR.H\VWRQHIXQFWLRQFDQQRWZRUNZKHQ
the Ceiling feature is set On in the Setting menu
S
‡3HUIHFWFRUUHFWLRQRIWKHLPDJHGLVWRUWLRQFDQQRW
be ensured with the Auto setup function. If the
distortion is not corrected properly by pressing the
AUTO SETUP or the AUTO SET button, adjust
manually by pressing the KEYSTONE button on
the remote control or selecting Keystone in the
6HWWLQJPHQXSS
‡Fine sync, Total dots, Horizontal and Vertical
position of some computers cannot be fully
adjusted with the Auto PC Adjustment function.
When the image is not provided properly with
this operation, manual adjustments are required
SS
Auto setup
Input search
This function detects the input signal automatically. When
a signal is found, the search will stop. Use the Point
Ÿź
buttons to select one of the following options.
Off ........... Input search does not work.
On1.......... Input search works under the following situation.
±:KHQSUHVVLQJWKHAUTO SETUP button on
the top control.
±:KHQ SUHVVLQJ WKHAUTO SET button on the
remote control.
On2.......... Input search works under the following situation.
±:KHQWXUQLQJRQWKHSURMHFWRUE\SUHVVLQJWKH
2167$1'%remote control.
±:KHQ SUHVVLQJ WKHAUTO SET button on the
remote control.
±:KHQ SUHVVLQJ WKHAUTO SETUP button on
the top control.
±:KHQWKHFXUUHQWLQSXWVLJQDOLVFXWRII
,IWKH1RVKRZRU)UHH]HIXQFWLRQLVDFWLYHFDQFHOLWWR
DFWLYDWHWKH,QSXWVHDUFK,WLVDOVRXQDYDLODEOHZKHQ2Q
Screen menu is displayed.
Auto PC adj.
On............ Enables Auto PC Adjustment when pressing
the AUTO SET button on the remote control or
the AUTO SETUP button on the top control.
Off.............. Disables Auto PC Adjustment.
Auto Keystone
Auto........... Always works and corrects keystone distortion
DFFRUGLQJWRWKHSURMHFWRUVWLOW
Manual....... Works only when pressing the AUTO SETUP
button on the top control or the AUTO SET
button on the remote control.
Off.............. Disables Auto Keystone.
Auto setup
3Note:
‡:KLOHInput search is set to On1 or On2, the status of Input
DQG/DPSDUHGLVSOD\HGHYHU\WLPHWKHVLJQDOLVVZLWFKHG
‡2QO\WKHODVWVHOHFWHGLQSXWVRXUFHFDQEHGHWHFWHG
‡'XULQJInput search is in progress, If the MENU button or the
2167$1'%Input search will stop. If
the COMPUTER 1/2 button or
9,'(2RU&20321(17RU6
VIDEO button is pressed, Input search will stop and go back
WRWKHEXWWRQVLQSXWVLJQDO
‡Input search, Auto PC adj. and Auto Keystone cannot be
set Off at the same time.
This function enables Input search, Auto Keystone correction
and Auto PC adjustment by pressing the AUTO SETUP button
on the top control or the AUTO SET button on the remote
control. Settings for those functions can be altered as follows:
Network
English
Blue
Off
On
Off
Off
Off
Computer 2
Direct on
►
►
1/2
Standby mode
►
Auto PC adj.
On 1
On
Auto Auto Keystone
►
On 1
On
Auto