VIEWSONIC PJL6233 - Manual (Page 47)

Video Input
Use the Point ŻŹ buttons to adjust the gamma value to
REWDLQDEHWWHUEDODQFHRIFRQWUDVWIURPWR
Gamma
Press the Point Ż button to decrease the sharpness of the
image; press the Point Ź button to increase the sharpness
RIWKHLPDJHIURPWR
Sharpness
An interlaced video signal can be displayed in progressive
mode. Select one of the following options.
Off ......... Disabled.
L1 .......... For an active picture.
L2 .......... For a still picture.
Film ....... For watching a film. With this function, the
projector reproduces pictures faithful to the
original film quality.
Progressive
Noise reduction
Noise interference on the screen can be reduced. Select
one of the following options to get smoother images.
Off ......... Disabled.
L1 ..........
/RZHUUHGXFWLRQ
L2 .......... Higher reduction
3Note:
Noise reduction and Progressive cannot be selected
when 480p, 576p, 720p, 1035i or 1080i is selected
S
To reset the adjusted data, select Reset and press the
6(/(&7EXWWRQ$FRQILUPDWLRQER[DSSHDUVDQGWKHQVHOHFW
Yes. All adjustments will return to their previous figures.
Reset
Store
To store the adjusted data, select Store and press the Point
Ź RUWKH6(/(&7EXWWRQ8VHWKH3RLQW Ÿź buttons to
VHOHFWRQHIURP,PDJHWRDQGSUHVVWKH6(/(&7EXWWRQ
$FRQILUPDWLRQER[DSSHDUVDQGWKHQVHOHFWYes. Stored
data can be called up by selecting an Image (1–4) in the
,PDJH0RGH6HOHFWLRQRQSDJH
Store Menu
$FRQILUPDWLRQER[
appears and then
select Yes.