VIEWSONIC PJL6233 - Manual (Page 75)

Check the indicators for projector condition.
‡‡‡JUHHQ ‡‡‡UHG ‡‡‡RII
‡‡‡EOLQNVJUHHQ
¼ :KHQWKHSURMHFWLRQODPSUHDFKHVLWVHQGRIOLIHWKH/$035(3/$&(LQGLFDWRUOLJKWV\HOORZ:KHQWKLV
LQGLFDWRUOLJKWV\HOORZUHSODFHWKHSURMHFWLRQODPSZLWKDQHZRQHSURPSWO\SS
The projector is off. (The AC power cord is unplugged.)
7KHSURMHFWRULVLQVWDQGE\PRGH3UHVVWKH2167$1'%to turn on the projector.
Projector Condition
POWER
red/green
Indicators
/$03
5(3/$&(
yellow
WARNING
red
¼
7KHSURMHFWRULVSUHSDULQJIRUVWDQGE\RUWKHSURMHFWLRQODPSLV
being cooled down. The projector cannot be turned on until cooling
is completed and the POWER indicator stops blinking.
¼
The temperature inside the projector is abnormally high. The
projector cannot be turned on. When the projector is cooled down
enough and the temperature returns to normal, the POWER
indicator stops blinking and the projector can be turned on. (The
WARNING indicator keeps blinking.)
¼
The projector detects an abnormal condition and cannot be turned
on. Unplug the AC power cord and plug it again to turn on the
projector. If the projector is turned off again, unplug the AC power
cord and contact the dealer or the service center for service and
checkup. Do not leave the projector on. It may cause an electric
VKRFNRUDILUHKD]DUG
¼
The projector is operating normally. ¼
The projector is in the Power management mode.
¼
¼
The projector has been cooled down enough and the temperature
returns to normal. When turning on the projector, the WARNING
indicator stops blinking.
Indicators and Projector Condition
‡‡‡EOLQNVUHG
Appendix