Information, Indication of the lamp status – VIEWSONIC PJL6233 User Manual
Page 129
Chapter 4 Controlling the Projector
Information
This page is to display the basic information of the projector status. Click
Information on the main menu.
Items
Description
Input
Displays selected input and source.
System
Displays selected signal system.
Signal
Input signal status (Yes, No)
Screen
Displays screen mode.
Lamp status
Displays lamp status with an icon. Refer to the table as shown below.
Security
Displays the security (PIN code lock) status (Yes, No)
PJ time(h)
Displays the accumulated use time of the projector.
Lamp Corres. Value(h) Displays the use time (Corresponding value) of the lamp.
Filter time(h)
Displays the accumulated use time of the filter.
Click this button to
update the information.
Indication of the lamp status
Icon display/background
Status
White/Blue
Lamp on (Normal)
White/Red
Lamp on (Lamp is being used over a specified use time, replace lamp
immediately)
Gray/Blue
Lamp off (Normal)
Gray/Red
Lamp off (Lamp is being used over a specified use time, replace lamp
immediately)
Red/Blue with X
Lamp failure (Lamp failure, check lamp condition)
Red/Red with X
Lamp failure (Lamp failure and lamp is being used over a specified use
time, replace lamp immediately)