VIEWSONIC PJL6233 - Manual (Page 63)

57
Setting
Factory default
7KLVIXQFWLRQUHWXUQVDOOVHWWLQJYDOXHVH[FHSWIRUWKHUser
logo, PIN code lock, Logo PIN code lock, Lamp counter
and Filter counter to the factory default settings.
Factory default
Warning log
This function records anomalous operations while the
projector is in operation and use it when diagnosing faults.
8SWRZDUQLQJORJVDUHGLVSOD\HGZLWKWKHODWHVWZDUQLQJ
message at the top of the list, followed by previous warning
messages in chronological order.
3Note:
:KHQWKH)DFWRU\GHIDXOWIXQFWLRQLVH[HFXWHGDOOWKH
warning log records will be deleted.
Factory default
This function is used to set a frequency for the filter
cleaning.
When the projector reached a specified time for cleanings,
a Filter warning icon appears on the screen, notifying the
cleaning is necessary. After cleaning the filter, be sure to
select Reset and set the timer. The Filter warning icon will
not turn off until the filter counter is reset.
For details about resetting the timer, refer to “Resetting the
)LOWHU&RXQWHU´RQSDJH
Filter counter
Filter counter
3UHVVWKH6(/(&7EXWWRQWRVHOHFWTimer, and then use
the Point
Ÿź buttons to set the timer. Select from (Off/
100H/ 200H/ 300H) depending on the use environment.
Filter warning icon appears on the screen at a set time.
Fig.1 Filter warning icon
3Note:
This icon also appears at turning on.
3Note:
The Filter warning icon (Fig.1) will not appear when the
Display function is set to Off SGXULQJFreeze(p.25),
or No show S