VIEWSONIC PJL6233 - Manual (Page 59)

Setting
Remote control
This function allows you to change brightness of the screen.
Lamp control
Lamp control
3Note:
/DPSPRGHFDQQRWEHFKDQJHGIRUDZKLOHDIWHUWXUQLQJ
RQWKHSURMHFWRU/DPSQHHGVVRPHWLPHWRVWDELOL]H
after the power is turned on. Stored lamp mode will be
DFWLYHDIWHUWKHODPSLVVWDELOL]HG
This projector provides two different remote control codes:
WKHIDFWRU\VHWLQLWLDOFRGHCode 1) and the secondary code
(Code 2). This switching function prevents remote control
interference when operating several projectors or video
equipment at the same time.
When operating the projector in Code 2, both the projector
and the remote control must be switched to Code 2.
To change the code for the projector:
Select either Code 1 or Code 2 in this Setting Menu.
To change the code for the remote control:
Press and hold both the MENU and IMAGE buttons
together for 5 seconds or more. After changing the code,
make sure the remote control operates properly.
3Note:
‡:KHQGLIIHUHQWFRGHVDUHVHWRQWKHSURMHFWRUDQGRQWKHUHPRWHFRQWURODQ\RSHUDWLRQFDQQRWEHPDGH,QWKDWFDVH
switch the code on the remote control to fit the code on the projector.
‡,IWKHEDWWHULHVDUHUHPRYHGIURPWKHUHPRWHFRQWUROIRUDORQJSHULRGRIWLPHWKHUHPRWHFRQWUROFRGHZLOOEHUHVHW
High ........... Brighter than the Normal mode.
Normal ....... Normal brightness
Eco ............
/RZHUEULJKWQHVVUHGXFHVWKHODPS
SRZHUFRQVXPSWLRQDQGH[WHQGVWKH
lamp life.
Remote control