VIEWSONIC PJL6233 - Manual (Page 127)

Chapter 4 Controlling the Projector
Item Description
Ceiling.....................Sets the image top/bottom and left/
right reversed. (ON, OFF)
Rear...........................Sets the image left/right reversed. (ON,
OFF)
Terminal.................Sets the COMPUTER IN 2/MONITOR
OUT terminal. (Computer2, Monitor
out)
Power
management .....Sets into the selected power manage-
ment mode (Ready, Shutdown, OFF) if
the input signal is interrupted and no control key is pressed for the specified period
of time.
*The specified time can be set 1 to 30 min.
Direct on................Sets the power-on mode when the AC cord is connected to the outlet. (ON, OFF)
Lamp control......Selects lamp control mode. (High, Normal, Eco)
Setting 1
Setting 2
Item Description
Language..............Sets the language display of projector's
on-screen display menu.
Auto setup ...........Executes the Auto PC Adj, Input Search
and Auto keystone function below
according to the each setting after click-
ing
Start button.
Auto PC Adj. .....Sets Auto PC Adjustment mode. (ON,
OFF)
Input search .....Sets the auto-input signal detection
mode. (ON1, ON2, OFF)
Auto keystone .... Sets Auto Keystone mode. (Auto, Manual, OFF)
Background.........Sets the screen background when no signal input. (Blue, User, Black)
Display....................Switches on or off the on-screen menu display on the screen. (ON, OFF)
Logo .........................Sets on or off the logo display on the screen during the startup. (OFF, Default, User)