Vanguard Managed Solutions Vanguard 6500 PLUS - Manual (Page 43)

Installation 2-35
Installing Nodes in Modulus Enclosures
Installing/Replacing Processor Cards
Introduction You can insert and remove any 6500 PLUS processor card from a powered-up Modulus
nest without damage.
Caution
6500 PLUS cards and their components are sensitive to static discharge, which can
damage components. Use proper handling and grounding precautions, including the
use of an anti-static grounding strap, whenever you handle a card.
Replacement
Procedure After inserting or removing a card, press the Reset button on the 6500 PLUS processor
card to restart the node. Reboot the node.
Replacing a Card in
a Modulus 8/18
Enclosure When replacing a card in a Modulus 8/18 enclosure, refer to the Modulus Planning
and Installation Guide. When replacing a card in a Modulus 9/21 enclosure, refer to
the Modulus 9 and 21 Installation and Operation Guide.