Toshiba M30 - Manual (Page 88)

User's Manual
O
PERATING
B
ASICS
4-20
❖ ❖ ❖ ❖ ❖
Do not use the DISC Backup function of Drag’n Drop CD+DVD to copy DVD-
Video and DVD-ROM with copyright protection.
❖ ❖ ❖ ❖ ❖ DVD-RAM disc cannot be backed up with the DISC Backup function of Drag’n
Drop CD+DVD.
❖ ❖ ❖ ❖ ❖ You cannot backup a CD-ROM or CD-R/RW to DVD-R/-RW using the DISC
Backup function of Drag’n Drop CD+DVD.
❖ ❖ ❖ ❖ ❖ You cannot back up DVD-ROM, DVD-Video or DVD-R/-RW to CD-R/RW
using the DISC Backup function of Drag’n Drop CD+DVD.
❖ ❖ ❖ ❖ ❖ Drag’n Drop CD+DVD cannot record in packet format.
❖ ❖ ❖ ❖ ❖ You might not be able to use the DISC backup function of Drag’n Drop
CD+DVD to back up a DVD-R/-RW disc that was made with other software on
a different DVD-R/-RW recorder.
❖ ❖ ❖ ❖ ❖ If you add data to a DVD-R disc that you have already recorded to, you might
not be able to read the added data under some circumstances. It cannot be read
in 16-bit operating systems, such as Windows 98SE and Windows ME. In
Windows NT4, you will need Service Pack 6 or later to read added data. Some
DVD-ROM and CD-RW/DVD-ROM drives cannot read added data regardless
of the operating system.
❖ ❖ ❖ ❖ ❖ Drag’n Drop CD+DVD does not support recording to DVD-RAM discs. To
record to a DVD-RAM, use Explorer or other utility.
❖ ❖ ❖ ❖ ❖ If you try to back up a DVD disc to a DVD-RW disc that was erased by the
Quick erase option, you might get a error message. Use the Full erase option to
clear the DVD-RW disc and try again.
❖ ❖ ❖ ❖ ❖
When you back up a DVD disc, be sure the source drive supports recording to
DVD-R/-RW discs. If the source drive does not support recording to DVD-R/-
RW discs, it might not be backed up correctly.