Toshiba M30 - Manual (Page 65)

3-9
G
ETTING
S
TARTED
❖ ❖ ❖ ❖ ❖
Saves power by shutting down the system when the computer receives no
input or hardware access for the duration set by the System hibernate feature.
❖ ❖ ❖ ❖ ❖ You can use the panel power off feature.
Starting Hibernation
NOTE: You can also enable Hibernation by pressing Fn + F4 . See
Chapter 5, The Keyboard , for details.
To enter Hibernation mode, follow the steps below.
1. Click start .
2. Select Turn Off Computer .
3. Open the Turn Off Computer dialog box. Hibernate is not displayed.
4. Press the Shift key. The Standby item will change to Hibernate .
5. Select Hibernate .
Automatic Hibernation
The computer will enter Hibernate mode automatically when you press the power
button or close the lid. First, however, make the appropriate settings according to
the steps below.
1. Open the Control Panel .
2. Open Performance and Maintenance and open Power Options .
3. Select the Hibernate window in the Power Options Properties ,
select the Enable hibernation check box and click the Apply button.
4. Open TOSHIBA Power Saver .
5. Select the Setup Action window.
6. Enable the desired Hibernation settings for When I press the power
button and When I close the lid .
7. Click the OK button.
Turning off the power