Toshiba M30 - Manual (Page 43)

T
HE
G
RAND
T
OUR
2-3
Right side
Parallel port This Centronics-compatible, 25-pin parallel port is used to
connect a parallel printer or other parallel device. This port
supports Extended Capabilities Port (ECP) standard.
PC card slot A PC card slot can accommodate one 5 mm Type II card.
You can install any industry standard PC card such as a
SCSI adaptor, Ethernet adaptor or flash memory card.
CAUTION: Keep foreign objects out of the PC card slot. A pin or similar
object can damage the computer’s circuitry.
S-Video out port This S-Video port lets you transfer NTSC or PAL data to
external devices.
i.LINK (IEEE1394) Connect an external device, such as a digital video camera
port to this port for high-speed data transfer.
SD card slot SD cards are used in a wide variety of external devices.
This slot lets you transfer data from the device to your
computer. An indicator on the right side of the slot glows
when a card is being accessed.
CAUTION: Keep foreign objects out of the SD card slot. A pin or similar
object can damage the computer’s circuitry.
Right side
Figure 2-3 shows the computer’s right side.
H
EADPHONE JACK
M
ICROPHONE JACK
USB
PORTS
O
PTICAL MEDIA DRIVE
USB
PORT
Figure 2-3 The right side of the computer
CB