Fn sticky key, Fn sticky key -6 – Toshiba M30 User Manual
Page 106
User's Manual
5-6
T
HE
K
EYBOARD
LCD Display Brightness:
Pressing
Fn + F7
increases the display brightness in
increments. When you press these hot keys, the current setting will be displayed
for two seconds by a pop-up icon. You can also change this setting through the
Monitor brightness item of the Power Save Mode window in Power Saver.
NOTES: 1. The brightness level is always set at the maximum value for
about 18 seconds, when the LCD turns on. After 18
seconds, the brightness level will appear at the Power
Save Mode setting or you can change it manually.
2. Display clarity increases with the brightness level.
Wireless setting: Fn + F8
are not used.
Touch Pad:
Pressing
Fn + F9
in a windows environment enables or disables the
Touch Pad function. When you press these hot keys, the current setting will
change and be displayed as an icon.
Fn Sticky key
You can use the TOSHIBA Accessibility Utility to make the
Fn
key sticky, that is,
you can press it once, release it, and they press an “
F
number
” key. To start the
TOSHIBA Accessibility Utility, click
start
, point to
All Programs
, point to
TOSHIBA
, point to
Utilities
and click
Accessibility
.