Toshiba M30 - Manual (Page 141)

8-7
O
PTIONAL
D
EVICES
Installing memory module
There are slots for two memory modules, one over the other. The procedures are the
same for installing either module.
1. Set the computer to boot mode and turn the computer’s power off. Make sure
the
Power indicator is off.
2. Remove universal AC adaptor and all cables connected to the computer.
3. Turn the computer upside down and remove the battery pack. Refer to
Replacing the battery pack section in Chapter 6, Power, for details.
4. Loosen one screw securing the memory module cover and lift off the cover.
Figure 8-5 Removing the memory module cover
Memory expansion
M
EMORY MODULE COVER
S
CREW