The VCS offers basic support for SNMP.
Tools such as TANDBERG Management Suite
(TMS) or HP OpenView may act as SNMP
network management systems (NMS). They
allow you to monitor your network devices,
including the VCS, for conditions that might
require administrative attention.
To allow the VCS to be monitored by a SNMP
NMS, you must enable SNMP on the VCS and
provide the name of the

SNMP community

within which it resides. You may optionally
provide the name of a

System contact

and the

physical

Location

of the system for reference

by administrators when following up on
queries.
By default, SNMP is

Enabled

with a

SNMP

community name

public

Note: the VCS does not support SNMP traps,
therefore it cannot be managed via SNMP.

SNMP Configuration

System Configuration

Configuring SNMP Settings

To configure the VCS’s SNMP settings:

System Configuration > SNMP

You will be taken to the

SNMP

page.

xConfiguration SNMP

•

Location

Specifies the physical location of the VCS.

Enabled

Select

to enable SNMP support.

SNMP community name

Sets the VCS’s SNMP community name.

System contact

Specifies the name of the person who can be
contacted regarding issues with the VCS.

Save

Click here to save your changes.

Restart

Click here to restart the system.

You must save your changes and
restart the system for any changes to
take effect.