Xconfiguration traversal server stun, Xconfiguration traversal server, H.323 – TANDBERG D14049.01 User Manual
Page 139: Stun, Text goes here, Command reference - xconfiguration
D 14049.01
07.2007
39
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Command Reference - xConfiguration
Transform [..00]
cont...
Pattern
cont...
Replace:
(Applies only if pattern behavior is set to Replace.)
Specifies the string to be used as a substitution for the part of the alias that matched the pattern.
Priority: <..65534>
Assigns a priority to the specified transform. Transforms are applied in order of priority, and the priority must be unique for each transform.
Traversal
Media
Port
Start: <04..65534>
For traversal calls (i.e. where the VCS is taking the media as well as the signaling), specifies the lower port in the range to be used for
the media.
End: <04..65534>
For traversal calls (i.e. where the VCS is taking the media as well as the signaling), specifies the upper port in the range to be used for
the media.
Server
H33
Assent
CallSignaling
Port: <04..65534>
Specifies the port on the VCS to be used for Assent signaling.
H4608
CallSignaling
Port: <04..65534>
Specifies the port on the VCS to be used for H.460.18 signaling.
Media
Demultiplexing
RTCP
Port: <04..65534>
Specifies the port on the VCS to be used for demultiplexing RTCP media. Note: You must
restart the system for any changes to take effect.
RTP
Port: <04..65534>
Specifies the port on the VCS to be used for demultiplexing RTP media. Note: You must restart
the system for any changes to take effect.
STUN
Discovery
Mode:
Determines whether the VCS will offer STUN discovery services to traversal clients.
On
: STUN discovery services are available.
Off
: STUN discovery services are not available.
Port: <04..65534>
Specifies the port to be used for STUN discovery services.