Xconfiguration ipprotocol, Xconfiguration ntp address, Xconfiguration log server – TANDBERG D14049.01 User Manual
Page 134: Address, Xconfiguration log level, Xconfiguration ldap, Text goes here, Command reference - xconfiguration
D 14049.01
07.2007
34
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Command Reference - xConfiguration
IP
cont...
SubnetMask:
Specifies the IPv4 subnet mask of the VCS. Note: You must restart the system for any changes to take effect.
V6
Address:
Specifies the IPv6 address of the VCS. Note: You must restart the system for any changes to take effect.
Gateway:
Specifies the IPv6 gateway of the VCS. Note: You must restart the system for any changes to take effect.
IPProtocol:
Selects the IP protocol(s) supported by the VCS.
Both
: the VCS will support both IPv4 and IPv6.
IPv4
: the VCS will support IPv4 only.
IPv6
: the VCS will support IPv6 only.
Note: You must restart the system for any changes to take effect.
LDAP
Encryption:
Sets the encryption to be used for the connection to the LDAP server.
Off
: no encryption is used.
TLS
: TLS encryption is used.
Password:
Sets the password to be used when binding to the LDAP server.
Server
Address:
Sets the IP address or FQDN of the LDAP server to be used when making LDAP queries.
Port: <..65534>
Sets the IP port of the LDAP server to be used when making LDAP queries.
UserDN:
Sets the user distinguished name to be used when binding to the LDAP server.
Log
Level: <..3>
Controls the granularity of event logging. 1 is the least verbose, 3 the most.
Server
Address:
Specifies the IP address or FQDN of the server to which the log will be written.
NTP
Address:
Sets the IP address or FQDN of the NTP server to be used when synchronizing system time.