Xcommand locate, Xcommand linkadd, Text goes here – TANDBERG D14049.01 User Manual
Page 152: Command reference - xcommand
D 14049.01
07.2007
5
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Command Reference - xCommand
xCommand
Description
Parameters
LinkAdd
Adds and configures a new link.
LinkName
(r)
:
Assigns a name to this link.
Node:
Specifies the first zone or subzone to which this link will be applied.
Node:
Specifies the second zone or subzone to which this link will be applied.
Pipe:
Specifies the first pipe to be associated with this link.
Pipe:
Specifies the second pipe to be associated with this link.
LinkDelete
Deletes a link.
LinkId
(r)
: <..600>
The index of the link to be deleted.
Locate
Runs the VCS’s location algorithm to locate the endpoint
identified by the given alias, searching locally, on neighbors,
and on systems discovered through the DNS system, within
the specified number of “hops”. Results are reported back
through the xFeedback mechanism, which must therefore
be activated before issuing this command (e.g. xFeedback
register event/locate).
Alias
(r)
:
The alias associated with the endpoint you wish to locate.
HopCount
(r)
: <0..55>
The hop count to be used in the search.
Protocol
(r)
:
The protocol used to initiate the search.
OptionKeyAdd
Adds a new option key to the VCS.
Key
(r)
:
Specifies the key of the software option to be added.
OptionKeyDelete
Deletes a software option key from the VCS.
OptionKeyId
(r)
: <..64>
Specifies the ID of the software option to be deleted.