Configuring traversal server ports, Configuring traversal, Server ports – TANDBERG D14049.01 User Manual
Page 106: Firewall traversal
06
D 14049.01
07.2007
06
Configuring the VCS as a Traversal Server
Configuring Traversal Server Ports
The VCS has specific listening ports assigned
for connections with the firewall. In most
cases the default ports should be used.
However, you have the option to change these
ports if necessary.
To configure the VCS traversal server ports:
VCS Configuration > Border Controller >
Ports
You will be taken to the
Ports
page.
xConfiguration Traversal Server
Media
xConfiguration Traversal Server
•
•
•
Media demultiplexing RTP port
Specifies the port on the VCS to be used for
demultiplexing RTP media.
Media demultiplexing RTCP port
Specifies the port on the VCS to be used for
demultiplexing RTCP media.
H.323 Assent call signaling port
Specifies the port on the VCS to be used for
Assent signaling.
H.323 H.460.18 call signaling port
Specifies the port on the VCS to be used for
H.460.18 signaling.
Save
Click here to save your settings.
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Firewall Traversal