Xconfiguration zones zone, Xconfiguration zones zone [1 ] hopcount, 1 ] m – TANDBERG D14049.01 User Manual
Page 144: Text goes here, Command reference - xconfiguration
D 14049.01
07.2007
44
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Command Reference - xConfiguration
Zones
cont...
LocalZone
cont...
TraversalSubZone
Bandwidth
PerCall
Mode:
Determines whether there is a limit on the bandwidth of any one traversal call be-
ing handled by the VCS.
None
: no bandwidth will be available.
Limited
: there will be a limit on the bandwidth.
Unlimited
: there will be no limit on the bandwidth.
Limit: <..00000000>
(applies only if Mode is set to Limited)
Specifies the bandwidth limit (in kbps) applied to any one traversal call being
handled by the VCS.
Total
Mode:
Determines whether or not there is a limit to the total bandwidth of all traversal
calls being handled by the VCS.
None
: no bandwidth will be available.
Limited
: there will be a limit on the bandwidth.
Unlimited
: there will be no limit on the bandwidth.
Limit: <..00000000>
(applies only if Mode is set to Limited)
Specifies the total bandwidth (in kbps) allowed for all traversal calls being handled
by the VCS.
Zone [..00]
ENUM
DNSSuffix:
Specifies the domain to be appended to the transformed E.164 number to create an ENUM host name which this zone is then queried
for.
H33
Mode:
Determines whether H.323 calls will be allowed to and from this zone.
On
: H.323 calls will be allowed.
Off
: H.323 calls will not be allowed.
HopCount: <..55>
Specifies the hop count to be used when sending an alias search request to this zone.
Note: if the search request was received from another zone and already has a hop count assigned, the lower of the two values will be used.