Text goes here, Command reference - xconfiguration – TANDBERG D14049.01 User Manual
Page 131
D 14049.01
07.2007
3
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Command Reference - xConfiguration
Bandwidth
cont...
Link [..400]
Name:
Assigns a name to this link.
Node
Name:
Specifies the first zone or subzone to which this link will be applied.
Node
Name:
Specifies the second zone or subzone to which this link will be applied.
Pipe
Name:
Specifies the first pipe to be associated with this link.
Pipe
Name:
Specifies the second pipe to be associated with this link.
Pipe [..00]
Bandwidth
PerCall
Mode:
Determines whether or not this pipe is limiting the bandwidth of individual calls.
None
: no bandwidth will be available.
Limited
: there will be a limit on the bandwidth.
Unlimited
: there will be no limit on the bandwidth.
Limit: <..000000>
If this pipe has limited per-call bandwidth, sets the maximum amount of bandwidth (in kbps) available for any
one call.
Total
Mode:
Determines whether or not this pipe is enforcing total bandwidth restrictions.
None
: no bandwidth will be available.
Limited
: there will be a limit on the bandwidth.
Unlimited
: there will be no limit on the bandwidth.
Limit: <..000000>
If this pipe has limited bandwidth, sets the maximum bandwidth (in kbps) available at any one time on the pipe.
Name:
Assigns a name to this pipe.