Texas Instruments TVP5147M1PFP - Manual (Page 87)

Electrical Specifications
79 SLES140A—March 2007 TVP5147M1PFP
3 Electrical Specifications
3.1 Absolute Maximum Ratings †
Supply voltage range: IOV
DD
to I/O GND 0.5 V to 4 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DV
DD
to DGND −0.2 V to 2 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A33VDD (see Note 1) to A33GND (see Note 2) −0.3 V to 3.6 V . . . . . . . . . . . . . . . .
A18VDD (see Note 3) to A18GND (see Note 4) −0.2 V to 2 V . . . . . . . . . . . . . . . . . .
Digital input voltage, V
I
to DGND −0.5 V to 4.5 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Digital output voltage, V
O
to DGND −0.5 V to 4.5 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Analog input voltage range AIN to AGND −0.2 V to 2 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature, T
A
0 ° C to 70 ° C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature, T
stg
−65
°
C to 150
°
C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
† Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. CH1_A33VDD, CH2_A33VDD
2. CH1_A33GND, CH2_A33GND
3. CH1_A18VDD, CH2_A18VDD, A18VDD_REF, PLL_A18VDD
4. CH1_A18GND, CH2_A18GND, A18GND
3.2 Recommended Operating Conditions
MIN NOM MAX UNIT
IOVDD Digital supply voltage 3 3.3 3.6 V
DVDD Digital supply voltage 1.65 1.8 1.95 V
AVDD33 Analog supply voltage 3 3.3 3.6 V
AVDD18 Analog supply voltage 1.65 1.8 1.95 V
VI(P-P) Analog input voltage (ac-coupling necessary) 0.5 1 2 V
VIH Digital input voltage, high (Note 1) 0.7 IOVDD V
VIL Digital input voltage, low (Note 2) 0.3 IOVDD V
IOH Output current, Vout = 2.4 V −4 mA
IOL Output current, Vout = 0.4 V 4 mA
TA Operating free-air temperature 0 70 ° C
NOTES: 1. Exception: 0.7 AVDD18 for XTAL1 terminal
2. Exception: 0.3 AVDD18 for XTAL1 terminal
3.2.1 Crystal Specifications
CRYSTAL SPECIFICATIONS MIN NOM MAX UNIT
Frequency 14.31818 MHz
Frequency tolerance ± 50 ppm