Texas Instruments TVP5147M1PFP - Manual (Page 10)

Introduction
2 SLES140A—March 2007 TVP5147M1PFP
1.1 Detailed Functionality
• Two 30-MSPS, 10-bit A/D channels with programmable gain control
• Supports NTSC (J, M, 4.43), PAL (B, D, G, H, I, M, N, Nc, 60) and SECAM (B, D, G, K, K1, L) CVBS, and
S-video
•
Supports analog component YPbPr video format with embedded sync
•
10 analog video input terminals for multisource connection
•
Supports analog video output
•
User-programmable video output formats
− 10-bit ITU-R BT.656 4:2:2 YCbCr with embedded syncs
− 10-bit 4:2:2 YCbCr with separate syncs
− 20-bit 4:2:2 YCbCr with separate syncs
− 2
×
sampled raw VBI data in active video during a vertical blanking period
− Sliced VBI data during a vertical blanking period or active video period (full field mode)
•
HSYNC/VSYNC outputs with programmable position, polarity, width, and field ID (FID) output
•
Composite and S-video processing
− Adaptive 2-D 5-line adaptive comb filter for composite video inputs; chroma-trap available
− Automatic video standard detection (NTSC/PAL/SECAM) and switching
− Luma-peaking with programmable gain
− Patented chroma transient improvement (CTI)
− Patented architecture for locking to weak, noisy, or unstable signals
− Single 14.31818-MHz reference crystal for all standards
− Line-locked internal pixel sampling clock generation with horizontal and vertical lock signal outputs
− Genlock output RTC format for downstream video encoder synchronization
•
Certified Macrovision

copy protection detection