Texas Instruments TMS320F2802 - Manual (Page 135)

TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
www.ti.com SPRS230N – OCTOBER 2003 – REVISED MAY 2012
8 Revision History
This data sheet revision history highlights the technical changes made to the SPRS230M device-specific
data sheet to make it an SPRS230N revision.
Scope: See table below.
LOCATION ADDITIONS, DELETIONS, AND MODIFICATIONS
Section 1.1 Features:
• Added "Endianness: Little Endian" feature
Section 5.2 Documentation Support:
• Added TMS320F2809, TMS320F2808, TMS320F2806, TMS320F2802, TMS320F2801, TMS320C2802,
TMS320C2801, TMS320F28016, TMS320F28015 Digital Signal Processors Data Manual (literature
number
SPRS230 )
• Added TMS320F280x, TMS320C280x, and TMS320F2801x DSC Silicon Errata (literature number SPRZ171 )
Section 6.8 Power Sequencing:
• Changed "Additionally it is recommended that no voltage larger than a diode drop (0.7 V) should be applied to
any pin prior to powering up the device" to "No voltage larger than a diode drop (0.7 V) above V
DDIO
should
be applied to any digital pin (for analog pins, it is 0.7 V above V
DDA
) prior to powering up the device.
Furthermore, V
DDIO
and V
DDA
should always be within 0.3 V of each other"
Table 6-28 Enhanced Quadrature Encoder Pulse (eQEP) Timing Requirements:
• Added footnote about limitations in the asynchronous mode
Table 6-45 Flash Parameters at 100-MHz SYSCLKOUT:
• Added footnote about flash memory being in an erased state when the device is shipped
Copyright © 2003–2012, Texas Instruments Incorporated Revision History 135
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015