TANDBERG GW Dataport Command Interface D13202 - Manual (Page 3)

TANDBERG GW Dataport Command Interface User Guide
D13202 Rev 01 3
1. Introduction
The TANDBERG GW Dataport Command Interface User Guide contains guidelines on how
to use the textual command interface supported by the GW. The Dataport Command Interface
can be accessed through Telnet via the LAN interface or through RS-232 by connecting a
serial cable to the serial interface connector, referred to as the Dataport (ref. chapter 2). Three
Telnet sessions can be connected to the GW at the same time in addition to the RS-232
connection.
If, after reading this manual, you require additional information concerning the use of the
TANDBERG GW Dataport Command Interface, please contact your local TANDBERG
dealer who will be able to supply you with relevant information for special applications.