TANDBERG GW Dataport Command Interface D13202 - Manual (Page 26)

TANDBERG GW Dataport Command Interface User Guide
D13202 Rev 01 26
• PRI interface: a/b/c/d. Letters identifying the different PRI interfaces.
o a: PRI interface 1
o b: PRI interface 2
o c: PRI interface 3
o d: PRI interface 4
• status: disabled / red alarm / blue alarm/ yellow alarm / synced /
active
• total numb. of channels: Total number of ISDN B channels.
• B chans free: Total number of free B channels, i.e. B channels currently
not in use.
• H0 chans free: Total number of free H0 channels, i.e. H0 channels
currently not in use.
Example of pristatus feedback:
*S pristatus b active 30 24 3
statin Gives status for incoming calls.
statin [callid]
Status format:
statin
---
Parameters:
• callid: 1..16/32. Identifier referring to a call.
• call-dir: incoming/outgoing
• call-state: idle/syncing/capex/unframed/speech/disconn/synced
• restrict: idle/norestrict/restrict
• chan: unknown / idle / speech / h323-voip / h221- / bonding-
/ h0-384 / h323 . Chan indicates number of B channels.
• audio: unknown / idle / g728 / g722 / g722.1 / g711 / auoff
• vidmode: unknown / vidoff / h261 / h263
• vidres: unknown / cif / qcif / sqcif / 4cif / sif / 4sif // vga / svga / xga
• duores: cif / qcif / sqcif / 4cif / sif / 4sif / vga / svga / xga
Example of statin feedback:
*S statin 1 outgoing sstatinynced norestrict h323-1920 g722 h263 cif unknown
*S statin 1 outgoing synced norestrict h323-1920 g722 h263 cif unknown
statout Gives status for outgoing calls.
statout[callid]
Status format:
statout
---
Parameters:
• callid: 1..16/32. Identifier referring to a call.
• call-dir: incoming/outgoing
• call-state: idle/syncing/capex/unframed/speech/disconn/synced
• restrict: idle/norestrict/restrict
• chan: unknown / idle / speech / h323-voip / h221- / bonding-
/ h0-384 / h323 , where chan indicates number of B
channels.
• audio: unknown / idle / g728 / g722 / g722.1 / g711 / auoff
• vidmode: unknown / vidoff / h261 / h263