TANDBERG GW Dataport Command Interface D13202 User Manual
Page 18

TANDBERG GW
Dataport Command Interface User Guide
D13202 Rev 01
18
4.2.2. General
GW
Commands
Command: Description:
calltransfer
Disconnects the h323 terminal of a GW call and reconnects to another h323 terminal,
by either specifying a telephone number or by referring to a directory entry.
calltransfer
calltransfer
parameters:
•
gwid: 1..16. Identifier referring to a GW call.
NOTE! When referring to a directory entry the GW will override the calltype
specified by the directory entry and the network type specified by the netprofile
command.
directory
Creates a directory entry in the directory list. The directory entry list can hold as
many as 99 directory entries. The directory are used together with the calltransfer
command.
directory
directory add [number[**2ndNumber]] [calltype[r]] [profile] [name]
or
directory all
or
directory delete
parameters:
•
entry no: 1..99. Specifies an entry number where to add or retrieve a
directory entry (only supplying the entry number will retrieve the given
entry).
NOTE! The user should be aware not to overwrite existing entries.
•
number: The phone number to be stored for this entry. If the destination is
a unit using H221, two numbers can be supplied separated by **.
•
calltype: tlph/2xh221/2b/3b/4b/5b/6b/8b/12b/18b/23b/30b/h0/auto. An
optional r can be added after the calltype parameter to denote a restricted
call.
NOTE! This parameter will be overridden when using calltransfer.
•
profile: p1/p2/p3/p4/p5/p6. Selects one of the predefined netprofiles, ref.
command netprofile.
•
name: The contacts name.
NOTE! If the name contains spaces the name has to be embraced by
quotes, e.g. “John Johnsen”
sub-commands:
•
add: Adds the specified directory entry to the first vacant entry in the
directory list.
•
all: Lists all nonempty directory entries
•
delete: Deletes a specified entry.
Example of directory feedback:
*P directory 99 123456789 auto p1 TANDBERG
disc
Disconnects a GW call.