Toshiba Strata DK Backup - Manual (Page 96)

Directory Number Administration –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
86 DKAdmin/DKBackup
to change the range of numbers used for all the ports, press F5 . A pop-up box displays,
enabling you to specify a range of numbers.
♦
Type the desired range of Port Reference Numbers for the PDNs (000 ~ 079).
♦
Type the desired range of Port Reference Numbers for the PhDNs (500 ~ 579).
♦
Type a Voice Mail CF Prefix (up to four characters) and press Enter . A message
displays: All ports will be reset to default values. Go
ahead?
Press Enter to set/change all Call Forward IDs.
6. Highlight the Voice Mail Message Waiting ID Code field and enter an applicable message
waiting ID code (up to 16 characters)
...or
to change the range of numbers used for all your ports, press F5 . A pop-up box displays,
enabling you to specify a range of numbers.
♦
Type the desired Port Reference Number for the PDNs (000 ~ 079).
♦
Type the desired Port Reference Number for the PhDNs (500-579).
♦
Type a Voice Mail MW Prefix (up to four characters) and press Enter . A message
displays: All ports will be reset to default values. Go
ahead?
Press Enter to set/change all Message Waiting IDs.
7. Press F9 to save the entries and upload the data to the DK, or F10 to save the assignments
and return to the Main Menu.
➤ To set or change detailed information for the PDNs/PhDNs
1. From the Directory Number Administration screen, highlight the DN you wish to edit and
press F2 . The Directory Number Administration screen for the selected DN number
displays.
This screen (shown
right) enables you to
turn on or off an
immediate ring, or a
12- or 24-second delay
ring. You can also
access your ringing
lines and flexible keys
from this screen.
2. Highlight the Imm.
Ring field for the
desired DN. The
spacebar toggles the
field between enabled
and disabled. When the field is enabled a check mark is displayed in the field.
3. Highlight the 12s Dly field for the desired DN. The spacebar toggles the field between
enabled and disabled. When the field is enabled a check mark is displayed in the field and
a 12-second delay before ringing occurs.