Toshiba Strata DK Backup - Manual (Page 65)

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– System/Station Administration
55 Administration Menu (DKAdmin)
4. Press Ctrl + F2 again. A pop-up
dialog box displays (shown at right).
5. Type the desired ports and press
Enter . Another pop-up dialog box
displays asking you confirm the
change.
6. Highlight Yes and press Enter to make the change or No to cancel the changes.
7. Press F10 to save the changes you just made.
CO Line Assignments (F6)
➤
To view CO line assignments
1. Press F6 from the Port
Attributes screen. The
Port CO Line
Information screen
displays (shown right).
2. To turn any program
on/off, highlight the
program number for
the CO Line and press
the spacebar. A check
mark indicates the
program is on.
3. Press Esc to return to the Port Attributes screen.
Speed Dial Assignments (F7)
➤ To assign speed dial assignments
➤ Press F7 from the Port
Attributes screen. The
Port Speed Dial
Numbers & Memos
screen displays (shown
right). Refer to
Page
68 for procedures.