Dnis number/name/ringing/vm-id assignments – Toshiba Strata DK Backup User Manual
Page 100
DNIS Administration
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
90
DKAdmin/DKBackup
Note
Each field has only two selections. Use the spacebar or
+/-
keys to toggle between
them.
3. Repeat Step 2 for each tie/DID line you wish to set/change.
4. Press
F10
to save your entries and return to the DNIS Administration screen.
DNIS Number/Name/Ringing/VM-ID Assignments
➤
To set/change the DNIS address reference numbers
1. Highlight the DNIS Number/Name/Ringing/VM-ID Assignments option and press
Enter
. The DNIS Number/Name/Ringing/VM-ID Assignments screen displays (shown
below).
The following items for each of the DNIS address reference numbers can be set/changed:
♦
DNIS number
♦
DNIS name
♦
Day ringing point
♦
Day 2 ringing point
♦
Night ringing point
♦
DNIS Voice Mail ID
number
Note
To blank out any
entry in these fields,
highlight the field
and press
F4
.
2. Highlight the DNIS No. field of the DNIS address with which you wish to work.
3. Enter the DNIS number, using 2 ~ 5 characters
...or
to enter a range for all your DNIS addresses, press
F5
. A pop-up dialog box displays. Type
the DNIS address range in the From and To fields and a starting DNIS number. Press
Enter
.
4. Highlight the DNIS Name field and type a DNIS name, using up to 16 characters. Press
Enter
.
Field
Selection
Tie Line
Voice & Page
Page & Voice/No Page & Voice
Tie/DID
Wind/Immed
Immediate/Wink Start
DID Line
Camp On Busy
Auto Camp-on/No Camp-on
DID/Tie Line
Second Dial Line
Second Tone/No Second Tone