Toshiba Strata DK Backup - Manual (Page 130)

System Installation –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
120 DKAdmin/DKBackup
➤
To select printer
1. Type p . The Printout
Destination Selection
Matrix screen displays
(shown right).
2. Highlight the
appropriate printer
destination and press
the spacebar. The
highlighter moves to
the Printer field.
3. Press F2 . The
Available Printer
Drivers dialog box
displays.
4. Scroll the printer list using the up/down arrow keys, or type the first letter of your printer
to “jump” to the printer selections which begin with that letter. For example, if you have a
Hewlett-Packard Laserjet printer, type
h and the screen scrolls to the beginning of the
Hewlett-Packard printers.
5. Highlight your selection and press Enter . The Printout Destination Selection Matrix
screen displays again.
6. Press Enter and the System Installation Submenu displays.
System Miscellaneous Variables
The System Miscellaneous Variables option (available to password levels 8 and 9) enables you
to control various system functions and conventions by changing the default entry.
➤ To change system variables
1. Type m . The System
Miscellaneous
Variables pop-up
displays (shown right).
2. Use the Enter or up/
down arrow keys to
move from field to
field. Press the
spacebar to toggle
between
Yes and No .
Confirm Entries When set to No , as you complete an input field (using
all the available field characters), the cursor
automatically moves to the next field. When set to
Yes ,
you must press the Enter key after field input to move
to the next field.
Bell On When set to Yes , as you complete all the available
characters of an input field, a beep sounds.