beautypg.com

Component video input setup, First time setup —continued – Onkyo 29344937 User Manual

Page 42

background image

42

First Time Setup

—Continued

If you connect a video component to a COMPONENT
VIDEO IN, you must assign that input to an input
selector. For example, if you connect your DVD player
to COMPONENT VIDEO IN 2, you must assign
COMPONENT VIDEO IN 2 to the DVD/BD input
selector.

Notes:
• If you connect an input component (such as UP-A1

series Dock that seated iPod or iPhone) to the
UNIVERSAL PORT jack, you cannot assign any
input to PORT selector.

• This procedure can also be performed on the AV

receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.

Component Video Input Setup

Input selector

Default assignment

DVD/BD

IN1

VCR/DVR

- - - - -

CBL/SAT

IN2

AUX

- - - - -

TV/TAPE

- - - - -

CD

- - - - -

PORT

- - - - -

1

Press the [RECEIVER] button,
followed by the [SETUP] button.

2

Use the Up and Down [ ]/[ ]
buttons to select “1. Input
Assign”, and then press
[ENTER].

SETUP

RECEIVER

ENTER

3

Use the Up and Down [ ]/[ ]
buttons to select
“1-2. Component”, and then
press [ENTER].

4

Use the Up and Down [ ]/[ ]
buttons to select an input
selector, and use the Left and
Right [

]/[

] buttons to select:

IN1: Select if the video component

is connected to
COMPONENT VIDEO IN 1.

IN2: Select if the video component

is connected to
COMPONENT VIDEO IN 2.

- - - - -: Select if you’re not using the

COMPONENT VIDEO
OUT.

5

Press the [SETUP] button.
Setup closes.

This manual is related to the following products: