Connecting a satellite, cable, terrestrial, Set-top box, or other video source, Connecting the av receiver —continued – Onkyo 29344937 User Manual
Page 33
33
With this hookup, you can use your satellite or cable receiver to listen to your favorite TV programs
via the AV receiver, which is useful if your TV has no audio outputs.
• With connection
, you can listen to and record audio from the video source or listen in Zone 2.
• To enjoy Dolby Digital and DTS, use connection
or .
(To
record or listen in Zone 2 as well, use
and
, or
and .)
Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source
Connection
AV receiver
Signal flow
Video source
COMPONENT VIDEO IN 2 (CBL/SAT)
⇐
Component video output
CBL/SAT IN V
⇐
Composite video output
CBL/SAT IN L/R
⇐
Analog audio L/R output
DIGITAL IN COAXIAL 2 (CBL/SAT)
⇐
Digital coaxial output
DIGITAL IN OPTICAL 1 (TV/TAPE)
⇐
Digital optical output
Hint!
Step 1: Video Connection
Choose a video connection that matches the video source (
or
)
, and then make the connection.
You must connect the AV receiver to your TV with the same type of connection.
A
B
Step 2: Audio Connection
Choose an audio connection that matches the video source (
,
, or
), and then make the connection.
a
b
c
a
b
c
a
b
a
c
A
B
a
b
c
Y
COAXIAL
OUT
P
B
COMPONENT VIDEO OUT
P
R
AUDIO
OUT
VIDEO
OUT
L
R
OPTICAL
OUT
b
c
A
C
a
B
Satellite, cable, set-top box, etc.
Connect one or the other
Connection
must be
assigned (see page 43)
c