beautypg.com

Connecting both audio & video, Which connections should i use, Connecting the av receiver —continued – Onkyo 29344937 User Manual

Page 26

background image

26

Connecting the AV receiver

—Continued

By connecting both the audio and video outputs of your DVD player and other AV components to the AV receiver, you
can switch the audio and video signals simultaneously simply by changing the input source on the AV receiver.

The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format
you choose will depend on the formats supported by your other components. Use the following sections as a guide.

Video Connection Formats

Video equipment can be connected to the AV
receiver by using any one of the following
video connection formats: composite video,
component video, or HDMI, the latter offering
the best picture quality.
When choosing a connection format, bear in
mind that the AV receiver doesn’t convert
between formats, so only outputs of the same
format as the input will output the signal.

Audio Connection Formats

Audio equipment can be connected to the AV
receiver by using any of the following audio
connection formats: analog, optical, coaxial, or
HDMI.
When you connect audio equipment to an
HDMI, OPTICAL, or COAXIAL input, you
must assign that input to an input selector (see
pages 41 and 43).

If signals are present at more than one input, the inputs will be selected automatically in the following order of priority:
HDMI, digital, analog.

Connecting Both Audio & Video

: Signal Flow

Video

Video

Audio

Speakers (see page 20 for hookup details)

DVD player, etc.

TV, projector,

etc.

Audio

Which Connections Should I Use?

IN

MONITOR OUT

DVD player, etc.

AV receiver

TV, projector, etc.

Component

Video Signal Flow Chart

HDMI

Composite

Component

HDMI

Composite

IN

OUT

DVD player, etc.

AV receiver

TV, projector, etc.

Optical

Coaxial

HDMI

HDMI

Audio Signal Flow Chart

Analog

Analog

*1 Depends on the “AudioTVOut” setting (see page 78)

and Digital Input Setup (see page 43).
And, the audio signal can be output only when the input
video signal is from HDMI IN.
Do not connect the optical or coaxial audio cable when
you want to output the analog audio signal.

This manual is related to the following products: