Onkyo 29344937 - Manual (Page 11)

11
Front & Rear Panels
—Continued
For detailed information, see the pages in parentheses.
GAME button (61)
Selects the listening modes intended for use with
video games.
DIMMER button (51)
Adjusts the display brightness.
MEMORY button (56)
Used when storing or deleting radio presets.
TUNING MODE button (54)
Selects the Auto or Manual tuning mode for AM
and FM radio.
DISPLAY button (50)
Displays various information about the currently
selected input source.
SETUP button
Opens and closes the setup menus.
TUNING, PRESET, Arrow, and ENTER
buttons
When AM or FM is selected, the TUNING [ ]/[ ]
buttons are used for radio tuning, and the PRESET
[
]/[ ] buttons are used to select radio presets (see
pages 54, 56). With the setup menus, they work as
arrow buttons and are used to select and set items.
The [ENTER] button is also used with the setup
menus.
RETURN button
Selects the previously displayed setup menu.
MASTER VOLUME control (49)
Sets the volume of the AV receiver to Min, 1
through 79, or Max.
PHONES jack (51)
This 1/4-inch phone jack is for connecting a
standard pair of stereo headphones for private
listening.
MUSIC OPTIMIZER button (52)
(North American models)
Turns the Music Optimizer on or off.
PURE AUDIO button and indicator (61)
(Asian models)
Selects the Pure Audio listening mode. The
indicator lights up when this mode is selected.
Pressing this button again selects the previous
listening mode.
Input selector buttons (49)
Select the following input sources: DVD/BD,
VCR/DVR, CBL/SAT, AUX, TV/TAPE, TUNER,
CD, PORT.
AUX INPUT (34, 60)
Used to connect a camcorder, game console, and so
on. There are input jacks for composite video and
analog audio.
PORTABLE (34):
Used to connect a portable Audio Player.
SETUP MIC (46)
The Audyssey 2EQ™ Room Correction and
Speaker Setup microphone connects here.
For detailed information, see the pages in parentheses.
SLEEP indicator (51)
Lights up when the Sleep function has been set.
MUTING indicator (51)
Flashes while the AV receiver is muted.
Listening mode and format indicators (61)
Show the selected listening mode and audio input
signal format.
Tuning indicators (54)
FM STEREO (54):
Lights up when tuned to a stereo FM station.
AUTO (54):
Lights up when Auto Tuning mode is selected for
AM or FM radio. Goes off when Manual Tuning
mode is selected.
TUNED (54):
Lights up when tuned to a radio station.
Message area
Displays various information.
Audio input indicators
Indicate the type of audio input that’s selected as the
audio source: PCM, MULTI CH, or HDMI.
Audyssey indicator (47, 70)
Flashes during Audyssey 2EQ™ Room Correction
and Speaker Setup. Lights up when the “Equalizer
Settings” is set to “Audyssey”.
Display