Oki 56801 - Manual (Page 96)

90
1. Press the Number keys to insert either text or numbers.
Press them repeatedly to enter the character desired.
2. To jump to the next field, use the or
key.
3. Press the Start key to enter your settings.
Restrictions
• If DNS has not been set, enter the IP address of the server.
The address must include the “.” (period) dividers (e.g.,
192.168.4.123).
• Up to 64 characters may be entered.
• You may use Latin letters, numbers and symbols.
• To enter symbols, use either one-touch keys or key “0” of the
numeric ten-key pad.
• The symbols that can be used are: ! # & ’ ( ) * + , - . / : ; = ?
· @ ? ” _ % ~
• The “~” (tilde) symbol shows on the display as “ -1 ”.
• The ” and ’ symbols cannot be used.
• Both uppercase and lowercase letters can be used. To
change the case, press the 1/CAPS key.
Pop User Id
Enter the user ID registered on the POP3 server.
1. Press the Number keys to insert either text or numbers.
Press them repeatedly to enter the character desired.
2. To jump to the next field, use the or
key.
3. Press the Start key to enter your settings.
Restrictions
• Up to 16 characters may be entered.
• You may use Latin letters, numbers and symbols.
• To enter symbols, use either one-touch key 20 or key “0” of
the numeric ten-key pad.
• The symbols that can be used are: ! # & ’ ( ) * + , - . / : ; = ?
· @ ? ” _ % ~
• The “~” (tilde) symbol shows on the display as “ -1 ”.
• Both uppercase and lowercase letters can be used. To
change the case, press the 1/CAPS key.
Pop Password
1. Enter the password registered on the POP3 server, which
must be alphanumerical characters of no more than 16
characters long.
2. If a password has already been entered, it is shown as
XXXXXXXXXXXXXXXX (sixteen Xs).
3. Press the Number keys to insert either text or numbers.
Press them repeatedly to enter the character desired.
4. To jump to the next field, use the or
keys.
YES NO
YES NO
YES NO