Oki 56801 - Manual (Page 38)

32
6. Press the Start key.
7. Enter the Location ID. This is a descriptive title up to 15
characters long. Refer to the instructions below. 8. Press the Start key. The machine displays G3 COMMUN.
SPEED.[33.6K] YES (<-) NO (->) .
9. Select with the NO key and then press the YES key.
10. G3 ECHO PROTECTION [ON] YES (<-) NO (->) is displayed.
Select and press the YES key.
11. To continue programming Auto Dial numbers, go back to
Step 3. If you are finished programming, press the Select
Function key.
Programming Groups
Once you have programmed some One-Touch keys or Auto Dial
numbers, you can then program these numbers into groups to
allow you to send the same fax to multiple locations.
Enter Pause (i.e., to wait for
long distance or outside
lines) Pause One-Touch key
Enter Plus Plus One-Touch key
Delete Delete One-Touch key
Caps Caps One-Touch key
Move the cursor to make
corrections YES and NO keys.
To do this Use
Enter Numbers Numeric keypad (press once)
Enter Spaces Space One-Touch key
Enter Hyphens Hyphen One-Touch key
Enter Pause Pause One-Touch key
Enter Plus Plus One-Touch key
Delete Delete One-Touch key
Caps Caps One-Touch key
Enter alphabet characters Locate the character you want on the numeric keypad.
Press that key repeatedly until the character appears. It
is also possible to input characters using One-Touch
keys.
To do this Use
Enter unique character Press the 0/Unique key repeatedly until the character
you want appears. The following characters are
available:
! # & ‘ ( ) * + , - . / : ; = ? · @ \ “ _ % ˜ д Я с ц ь Ж Е Ш
ж е ш.
Note: Some unique characters can be entered using
one-touch keys.
Enter two letters using the
same key. Press the NO key to move to the next character.
Move the cursor to make
corrections YES and NO keys.
To do this Use