Oki 56801 User Manual

Page 62

there will be no change in fax transmission time because
ECM will not be used.

20: REMOTE DIAGNOSIS

: The remote diagnostics feature

allows a service person to remotely dial and service your fax
machine. Available settings are On and Off.

22: NO TONER MEM RX

: With this function turned on, your

fax machine will automatically receive and store messages in its
memory when it is low on toner. When turned off, messages will
print even if toner is low or empty. Available settings are On and
Off.

23: MEM FULL SAVE

: With Broadcast Transmission and other

functions, call origination starts after an entire document is read
into memory. If during this process, memory becomes full and an
“operator time out” seems likely, a message to that effect is
shown in the Display Panel if this MEM full save function is on.
If it is off, data that could not be read into memory is
automatically deleted. Available settings are On and Off.

24: CONTINUOUS TONE

: With this function on, you can

choose whether to have a warning tone sound when receiving a
transmission. Pressing the

STOP

key turns off the tone. Set this

function to off for no warning sound. Available settings are On
and Off.

25: INSTANT DIAL

: Set this function to start reading documents

upon call origination when transmitting. Available settings are
On and Off.

Broadcast Mode

• Memory available: all the documents are read into the mem-

ory before call origination.

• Memory full: reading is impossible.

25 Instant Dial = ON:

• Memory available: document reading starts upon call origi-

nation.

• Memory full—Feeder transmission: starts reading document

when receiving the CFR signal of the remote machines after
call origination.

25 Instant Dial = OFF, 17 Mem./Feeder SW = MEMORY:

• Memory Available: call origination after all documents are

read into memory.

• Memory Full—Feeder transmission: starts reading document

when receiving the CFR signal of the remote machines after
call origination.

25 Instant Dial = OFF, 17 Mem./Feeder SW = FEEDER:

• Memory Available—Feeder transmission: starts reading doc-

ument when receiving the CFR signal of the remote
machines after call origination.

• Memory Full—Feeder transmission: starts reading document

when receiving the CFR signal of the remote machines after
call origination.