Oki 56801 User Manual
Page 53
47
Changing Password or Closing Mailbox
If you want to change the password of an existing mailbox, or if
you want to close an existing mailbox, follow the instructions
below.
1. Press the
Select Function
key.
2. Press the
9/User Prog.
One-Touch key. The display shows
1:FUNC. PROGRAMMING
.
3. Using the numeric keypad, press
5
. The display shows
5:PERSONAL BOX PRG
.
4. Press the
YES
key. The display shows
PERSONAL BOX
NO. [ ]
.
5. Using the numeric keypad, enter the 2-digit number of the
mailbox whose password you want to change, or which you
want to close.
6. Press the
YES
key. The display shows
PERSONAL BOX
[CONF]
.
7. To close a mailbox, press the
NO
key until
[CLOSE]
is
displayed and press
YES
. Go to Step 11.
8. To change the password, press the
YES
key. The display
shows
PRG. PASSWORD [XXXX]
.
9. Enter a new 4-digit number on the numeric keypad.
10. Press the
YES
key to accept the new password.
11. The fax machine shows
DELETE PERSONAL BOX
. Press
Yes
.
To continue programming mailboxes, go back to Step 5. If
you have finished programming, press the
Select Function
key.
Printing Confidential Faxes
Each time your fax machine receives a confidential fax, it auto-
matically prints a confidential reception report telling you
which mailbox number received the message. To print a confi-
dential fax after your fax machine has received it, follow the
instructions below.
1. Press the
Select Function
key.
2. Press the
2/Print Operation
One-Touch key. The display
shows
PRINT MEMORY MSG.?
Press
No
.
3. The display shows
PRINT PERSONAL BOX?
4. Press the
YES
key. The display shows
PERSONAL BOX
NO. [ ]
.
5. Using the numeric keypad, enter the two-digit number of the
mailbox you want to print from. The display shows
PERSONAL BOX
NO. [ ] YES OR NO
. Press the
YES
key.
Note: If no message is stored in that mailbox, the display shows
NO DATA IN MEMORY
.
SELECT
FUNCTION
USER
PROG.
9/OP
1: FUNC.PROGRAMMING
YES
JKL
5
SELECT
FUNCTION
OPERATION.
2/AB
1: PRINT MEMORY MSG?
YES
NO