Oki 56801 - Manual (Page 49)

43
numbers from the numeric keypad. Refer to the instructions
below.
4. When finished selecting locations, press Start . The display
shows:
5. If satisfied with the entries submitted, press Start to begin
transmission or to load the documents. If you wish to
CHECK what entries have been submitted, press the NO key
to access an Entry Report or to check the entries via the LCD
screen.
6. If checking the entries, the display will read:
7. Press the YES key to print the Entry Report or press NO to
check the entries via the LCD. If checking via LCD the
following appears:
8. Press the Start key repeatedly to cycle through the entries.
Press Start to accept the entry or NO to clear the entry.
9. Once finished, press No to exit the verification menu and the
display will read:
10. Press Start to begin transmission or to load the documents
and then send.
Delayed Sending of Faxes
The delayed transmission feature allows you to send documents
at a specified date and time, and frees you from the need to
manually start the transmission. You can program a delayed
transmission to occur at any time on the day of your
transmission, or at any time over the next three days.
To Do This Do This
One-Touch key Press the One-Touch key. Lift the main One-Touch
keypad to access One-Touch keys 21-40.
Auto Dial number Press the Auto Dial key, and then enter the 3-digit
Auto Dial number on the numeric keypad.
A group Using the numeric keypad, press the # key after press
Auto Dial key, then enter the number of the group you
want to use.
A number dialed on the
numeric keypad Dial as you would on a normal telephone.
ENTRY IS OK?
DIAL(START)CHECK( )
PRINT ENTRY REPORT?
YES( ) NO( )
CHECK LOCATIONS(S)
YES(STR/LOC.) EXIT( )
ENTRY IS OK?
DIAL(START)CHECK( )