Oki 56801 User Manual

Page 39

1. Press the

Select Function

key, then press the

8/Location

Prog.

One-Touch key. The display shows

LOCATION

PROGRAMMING

2. On the numeric keypad, press the

key. The display shows

GROUP SETTING

3. Using the numeric keypad, enter the group number (01 - 20)

you want to program.

4. The display shows the number of your current group and

SELECT LOC.(S)

. You can now add a location to your group

(or delete a location from it). Refer to the instructions below.

5. After you have completed your selection (by pressing

YES

), the display again shows

SELECT LOC.(S)

. Continue

to add or delete locations from your group. Each group can
contain up to a maximum of all of the One-Touch and Auto
Dial locations available on your fax machine.

6. When you are finished programming your group, press the

key. The display shows

LOCATION PROGRAMMING

7. To program another group, go back to Step 2. If you are

finished, press the

Select Function

key.

To Do This

Use

Add a One-Touch location

Press the One-Touch key. Press START to add it to the
group.

Add Auto Dial location

Press Auto Dial. Enter the 3-digit Auto Dial number.
Press START to add it to the group.

Delete One-Touch location

Press the One-Touch key. Press START to delete it
from the group.

Delete Auto Dial location

Press the Auto Dial key. Enter the 3-digit Auto Dial
number. Press START to delete it from the group.

Search for a location name
to add or delete

Press the Search key continuously until by the location
you want appears. Press START to add it to the group.
Press START to delete it.